# Aerodyn v15.04 with Parametric Analysis

**URL:** <https://forums.nlr.gov/t/aerodyn-v15-04-with-parametric-analysis/1765>\
**Category:** Rotor Aerodynamics\
**Created:** [January 11, 2018, 4:43pm UTC](https://forums.nlr.gov/t/aerodyn-v15-04-with-parametric-analysis/1765 "2018-01-11T16:43:16Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Jason.Jonkman](https://dub1.discourse-cdn.com/nrel/user_avatar/forums.nlr.gov/jason.jonkman/32/3086_2.png) [@Jason.Jonkman](https://forums.nlr.gov/u/Jason.Jonkman)\
**Post date:** [January 11, 2018, 6:12pm UTC](https://forums.nlr.gov/t/aerodyn-v15-04-with-parametric-analysis/1765/2 "2018-01-11T18:12:36Z")

</div>

Dear Mohamed,

Yes, of course. Using the standalone driver for AeroDyn v15, you can easily run a number of simulations with different uniform wind speeds, fixed rotor speeds, fixed pitch angles, etc. using the Combined-Case Analysis option and use the results to generate a surface of e.g. power coefficient versus tip-speed ratio and pitch angle.

Best regards,

---

_[View the full topic](https://forums.nlr.gov/t/aerodyn-v15-04-with-parametric-analysis/1765)._