# Parameter access in user subroutines

**URL:** <https://forums.nlr.gov/t/parameter-access-in-user-subroutines/2059>\
**Category:** Computer-Aided Engineering Software Tools\
**Created:** [June 11, 2019, 1:57pm UTC](https://forums.nlr.gov/t/parameter-access-in-user-subroutines/2059 "2019-06-11T13:57:54Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![Jason.Jonkman](https://dub1.discourse-cdn.com/nrel/user_avatar/forums.nlr.gov/jason.jonkman/32/3086_2.png) [@Jason.Jonkman](https://forums.nlr.gov/u/Jason.Jonkman)\
**Post date:** [December 6, 2021, 5:01pm UTC](https://forums.nlr.gov/t/parameter-access-in-user-subroutines/2059/13 "2021-12-06T17:01:48Z")

</div>

Dear Liye,

A similar question was asked and answered in the following forum topic: [(measured) Pitch Angle differs to demanded pitch angle - #2 by Jason.Jonkman](http://forums.nlr.gov/t/measured-pitch-angle-differs-to-demanded-pitch-angle/2085/2).

Best regards,

---

_[View the full topic](https://forums.nlr.gov/t/parameter-access-in-user-subroutines/2059)._